L293D motor control shield motor drive expansion board motor shield

• • Description
  • Features
  • Specifications
  • Package Contents

    L293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what's known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor.
  - 2 interface for 5V Servo connected to For Ardui-no's high-resolution dedicated timer - no jitter!
  - Can drive 4 DC motors or 2 stepper motors or 2 Servo
  - Up to 4 bi-directional DC motors with individual 8-bit speed selection
  - Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
  - 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC
  - Pull down resistors keep motors disabled during power-up
  - reset button
  - 2 external terminal power interface, for seperate logic/motor supplies
  - Tested compatible for Ardui-no Mega, Diecimila & Duemilanove

   L293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what's known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor.
  - 2 interface for 5V Servo connected to For Ardui-no's high-resolution dedicated timer - no jitter!
  - Can drive 4 DC motors or 2 stepper motors or 2 Servo
  - Up to 4 bi-directional DC motors with individual 8-bit speed selection
  - Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
  - 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC
  - Pull down resistors keep motors disabled during power-up
  - reset button
  - 2 external terminal power interface, for seperate logic/motor supplies
  - Tested compatible for Ardui-no Mega, Diecimila & Duemilanove

    L293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what's known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor.
  - 2 interface for 5V Servo connected to For Ardui-no's high-resolution dedicated timer - no jitter!
  - Can drive 4 DC motors or 2 stepper motors or 2 Servo
  - Up to 4 bi-directional DC motors with individual 8-bit speed selection
  - Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
  - 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC
  - Pull down resistors keep motors disabled during power-up
  - reset button
  - 2 external terminal power interface, for seperate logic/motor supplies
  - Tested compatible for Ardui-no Mega, Diecimila & Duemilanove

   polybag

  
  

   

  
  

   

  
  

   

  
  

   

  
  

  ¡¡