中文 · English

  • Module Board
Location:Home >Module Board

5V 4-Phase Stepper Step Motor + Driver Board ULN2003 with drive Test Module Machinery Board

  •  5 lines and 4 phases can be driven by ordinary uln2003 chip; can also be connected in phase 2 development board.
    Supporting the use of a direct plug and easy to use stepper motor used in the development board.
    ULN2003 stepper motor driver board:
    A, B, C, D four-phase LED indicates the status of the stepper motor work.
    Stepper motor with a standard interface, when used directly pluggable.
     
    Specifications:
    Diameter: 28mm / 1.1in
    Voltage: DC 5V
    Length: 274mm / 10.8in
    Step Angle: 5.625 * 1/64
    Reduction ratio: 1/64
    DC Resistance: 200±7% (25)
    Insulation Resistance: >10M (500V)
    Dielectric Strength: 600V AC / 1mA / 1s
    Insulation Grade: A
    No-load Pull in Frequency: >600Hz
    No-load Pull out Frequency: >1000Hz
    Pull in Torque: >34.3mN.m(120Hz)
    Detent Torque: >34.3mN.m
    Temperature Rise: <40K(120Hz)
    Noise: <40dB (120Hz, No load, 10cm)
    Board Size: Approx. 29 * 21mm
    Total Weight: 41g / 1.43oz

     5 lines and 4 phases can be driven by ordinary uln2003 chip; can also be connected in phase 2 development board.
    Supporting the use of a direct plug and easy to use stepper motor used in the development board.
    ULN2003 stepper motor driver board:
    A, B, C, D four-phase LED indicates the status of the stepper motor work.
    Stepper motor with a standard interface, when used directly pluggable.
     
    Specifications:
    Diameter: 28mm / 1.1in
    Voltage: DC 5V
    Length: 274mm / 10.8in
    Step Angle: 5.625 * 1/64
    Reduction ratio: 1/64
    DC Resistance: 200±7% (25)
    Insulation Resistance: >10M (500V)
    Dielectric Strength: 600V AC / 1mA / 1s
    Insulation Grade: A
    No-load Pull in Frequency: >600Hz
    No-load Pull out Frequency: >1000Hz
    Pull in Torque: >34.3mN.m(120Hz)
    Detent Torque: >34.3mN.m
    Temperature Rise: <40K(120Hz)
    Noise: <40dB (120Hz, No load, 10cm)
    Board Size: Approx. 29 * 21mm
    Total Weight: 41g / 1.43oz

     5 lines and 4 phases can be driven by ordinary uln2003 chip; can also be connected in phase 2 development board.
    Supporting the use of a direct plug and easy to use stepper motor used in the development board.
    ULN2003 stepper motor driver board:
    A, B, C, D four-phase LED indicates the status of the stepper motor work.
    Stepper motor with a standard interface, when used directly pluggable.
     
    Specifications:
    Diameter: 28mm / 1.1in
    Voltage: DC 5V
    Length: 274mm / 10.8in
    Step Angle: 5.625 * 1/64
    Reduction ratio: 1/64
    DC Resistance: 200±7% (25)
    Insulation Resistance: >10M (500V)
    Dielectric Strength: 600V AC / 1mA / 1s
    Insulation Grade: A
    No-load Pull in Frequency: >600Hz
    No-load Pull out Frequency: >1000Hz
    Pull in Torque: >34.3mN.m(120Hz)
    Detent Torque: >34.3mN.m
    Temperature Rise: <40K(120Hz)
    Noise: <40dB (120Hz, No load, 10cm)
    Board Size: Approx. 29 * 21mm
    Total Weight: 41g / 1.43oz

     polybag