HC SR04 HCSR04 ultrasonic transducer ultrasonic sensor

• • Description
  • Features
  • Specifications
  • Package Contents

   Module main technical parameters:

  1.Working Voltage : 5V(DC)

  2.Static current: Less than 2mA.

  3.Output signal: Electric frequency signal, high level 5V, low level 0V.

  4.Sensor angle: Not more than 15 degrees.

  5.Detection distance: 2cm-450cm.

  6.High precision: Up to 0.3cm

   7.Input trigger signal: 10us TTL impulse

  8.Echo signal : output TTL PWL signal

  Mode of connection:

  1.VCC

  2.trig(T)

  3.echo(R)

  4.GND

  Use method:

  Supply module with 5V, the output will be 5V while obstacle in range, or 0V if not.The out pin

   of this module is used as a switching output when anti-theft module, and without the feet when

   ranging modules.

  Note : the module should be inserted in the circuit before been power, which avoid producing

   high level of misoperation;if not, then power again.

   Module Working Principle:

   1.Adopt IO trigger through supplying at least 10us sequence of high level signal.

  2.The module automatically send eight 40khz square wave and automatically detect whether receive

   the returning pulse signal.

  3.If there is signals returning, through outputting high level and the time of high level

   continuing is the time of that from the ultrasonic transmitting to receiving. Test distance =

   (high level time * sound velocity (340M/S) / 2.

  Note : This module is not suitable to connect with electric power, if you need to connect this

   module with electronic power,then let the GND terminal of this module to be connected

   first,otherwise, it will affect the normal work of the module

   Module main technical parameters:

  1.Working Voltage : 5V(DC)

  2.Static current: Less than 2mA.

  3.Output signal: Electric frequency signal, high level 5V, low level 0V.

  4.Sensor angle: Not more than 15 degrees.

  5.Detection distance: 2cm-450cm.

  6.High precision: Up to 0.3cm

   7.Input trigger signal: 10us TTL impulse

  8.Echo signal : output TTL PWL signal

  Mode of connection:

  1.VCC

  2.trig(T)

  3.echo(R)

  4.GND

  Use method:

  Supply module with 5V, the output will be 5V while obstacle in range, or 0V if not.The out pin

   of this module is used as a switching output when anti-theft module, and without the feet when

   ranging modules.

  Note : the module should be inserted in the circuit before been power, which avoid producing

   high level of misoperation;if not, then power again.

   Module Working Principle:

   1.Adopt IO trigger through supplying at least 10us sequence of high level signal.

  2.The module automatically send eight 40khz square wave and automatically detect whether receive

   the returning pulse signal.

  3.If there is signals returning, through outputting high level and the time of high level

   continuing is the time of that from the ultrasonic transmitting to receiving. Test distance =

   (high level time * sound velocity (340M/S) / 2.

  Note : This module is not suitable to connect with electric power, if you need to connect this

   module with electronic power,then let the GND terminal of this module to be connected

   first,otherwise, it will affect the normal work of the module

   Module main technical parameters:

  1.Working Voltage : 5V(DC)

  2.Static current: Less than 2mA.

  3.Output signal: Electric frequency signal, high level 5V, low level 0V.

  4.Sensor angle: Not more than 15 degrees.

  5.Detection distance: 2cm-450cm.

  6.High precision: Up to 0.3cm

   7.Input trigger signal: 10us TTL impulse

  8.Echo signal : output TTL PWL signal

  Mode of connection:

  1.VCC

  2.trig(T)

  3.echo(R)

  4.GND

  Use method:

  Supply module with 5V, the output will be 5V while obstacle in range, or 0V if not.The out pin

   of this module is used as a switching output when anti-theft module, and without the feet when

   ranging modules.

  Note : the module should be inserted in the circuit before been power, which avoid producing

   high level of misoperation;if not, then power again.

   Module Working Principle:

   1.Adopt IO trigger through supplying at least 10us sequence of high level signal.

  2.The module automatically send eight 40khz square wave and automatically detect whether receive

   the returning pulse signal.

  3.If there is signals returning, through outputting high level and the time of high level

   continuing is the time of that from the ultrasonic transmitting to receiving. Test distance =

   (high level time * sound velocity (340M/S) / 2.

  Note : This module is not suitable to connect with electric power, if you need to connect this

   module with electronic power,then let the GND terminal of this module to be connected

   first,otherwise, it will affect the normal work of the module

   polybag

   

   

   

   

   

   

  
  

  ¡¡